+- Mirage Engine (https://mirage-engine.uk/forums)
+-- Forum: Mirage Source (Nostalgia) (https://mirage-engine.uk/forums/forumdisplay.php?fid=61)
+--- Forum: Archive (2006-2011) (https://mirage-engine.uk/forums/forumdisplay.php?fid=18)
+---- Forum: General (https://mirage-engine.uk/forums/forumdisplay.php?fid=17)
+---- Thread: What am I doing wrong? (/showthread.php?tid=1941)
What am I doing wrong? - fatnoob - 20-07-2008
For some reason I still can't port forward, after following tons of guides.
![[Image: Help1.jpg]](http://i113.photobucket.com/albums/n209/Mun_Boy/Help1.jpg)
And my IP is 124.182.129.91 and i put it in IP config.
But others still can't connect to it.
Whats wrong?
Re: What am I doing wrong? - Labmonkey - 20-07-2008
2 things.
1. What is your internal ip?
2. What port does your game run on, if you are using mirage it is probably like 7000.
3. What engine are you using?
sorry that was 3
Re: What am I doing wrong? - fatnoob - 20-07-2008
Labmonkey Wrote:2 things.
1. What is your internal ip?
2. What port does your game run on, if you are using mirage it is probably like 7000.
3. What engine are you using?
sorry that was 3
1. 124.182.129.91
2. 4000
3. I'm using Elysium Diamond.
Re: What am I doing wrong? - Labmonkey - 20-07-2008
ok found your problem. Your INTERNAL ip is not 124.182.129.91, that is your external ip. To find your internal ip, open command prompt (run, cmd) and type ipconfig.
There should be something called "ip address ............... "
what does it say there.
Re: What am I doing wrong? - fatnoob - 20-07-2008
Labmonkey Wrote:ok found your problem. Your INTERNAL ip is not 124.182.129.91, that is your external ip. To find your internal ip, open command prompt (run, cmd) and type ipconfig.
There should be something called "ip address ............... "
what does it say there.
124.182.129.91
So where do i put that?
Re: What am I doing wrong? - Labmonkey - 20-07-2008
um....
type ipconfig in command prompt
type out everything it says.
Re: What am I doing wrong? - Rian - 20-07-2008
Your internal IP is gonna be 192.168.0.X when you type ipconfig into command. X is the key number here, and you need to put that in the one of those boxes on your screen shot.
Re: What am I doing wrong? - fatnoob - 21-07-2008
Sonire Wrote:Your internal IP is gonna be 192.168.0.X when you type ipconfig into command. X is the key number here, and you need to put that in the one of those boxes on your screen shot.
its ok, i got it to work.